Skip to content

A Complete Guide to Plumbing and Heating Services: Everything You Need to Know

Plumbing and heating services are essential for keeping homes, businesses, and other properties functioning safely and efficiently. Professional plumbers and heating technicians provide a wide range of services that can help ensure a property is kept in good condition. These services include installing new plumbing systems, repairing existing plumbing and heating systems, inspecting properties for potential danger, and providing regular maintenance to keep everything running properly.

Plumbing services may include installation of new fixtures such as sinks, toilets, showers and tubs; repairs such as broken pipes or faulty faucets; inspections for potential safety issues; unclogging drains or sewers; installing water heaters or other hot water solutions; replacing old pipes with more durable options; and installing backflow prevention devices. Heating services may involve installation of furnaces, boilers and other heating units; repairs to existing systems including thermostats, radiators, convectors or vents; seasonally-appropriate maintenance such as replacing air filters or cleaning ducts; retrofitting older sites with newer energy-efficient equipment; repairs to gas lines that connect to the main heater unit; and checking smoke alarms or carbon monoxide detectors. 

In addition to these common tasks of plumbing and heating technicians, they may also be called upon to troubleshoot complex problems with radiators or gas lines. They can also provide advice on how best to make any necessary upgrades or replacements that will help reduce energy costs while increasing the comfort level in a property’s indoor environment. And if an emergency arises such as a burst pipe or furnace failure during cold weather months that requires immediate attention, professional plumbers and heating technicians are available 24 hours a day for quick service. 

Both plumbers and heating technicians must often work in tight spaces that require reaching awkward angles with limited visibility. This can be dangerous work – even trained professionals can suffer from severe injuries from exposure to extreme temperatures inside walls or from falls due to unsteady footing on ladders. It is important for these workers to take safety precautions such as using protective gear like gloves when handling sharp objects like pipes or wearing safety harnesses when climbing high on ladders in order to minimize the risk of injury while performing their duties. 

Boiler Repair & Replacement Service

Boiler Repair & Replacement is an important service that many residential and commercial buildings need to keep their heating systems running at optimal levels. Boilers are typically used to provide heat for a variety of applications such as hot water heating, space heating and steam generation. With regular use, boilers can experience a variety of issues which may require repair or replacement.

What is a Boiler?

A boiler is a closed vessel in which water or other fluid is heated. Boilers are used to generate steam which can be used for a variety of purposes including space heating, sterilization, drying, and power generation. The heated or vaporized fluid exits the boiler for use in various processes or heating applications. In some cases, boilers can be used to heat domestic hot water for showers, sinks and dishwashers. 

Boilers are available in a variety of sizes and shapes and can be powered by a variety of fuels including natural gas, propane, oil, electricity or even wood. Boilers are also classified according to their pressure ratings which range from low-pressure systems (which operate at 15 psi or less) to high-pressure systems (operating at over 1000 psi). Some boilers can even be designed for dual fuel combustion which allows them to use two different fuel sources simultaneously. Boiler efficiency is measured by Annual Fuel Utilization Efficiency (AFUE) which measures the amount of energy that is converted into useful heat compared to the amount of energy that is consumed by the boiler. High-efficiency boilers can achieve AFUE ratings as high as 98 percent while older, less efficient models may only have an efficiency rating of 65 percent or less. 

Today, there are a variety of boilers available on the market that are designed to meet a wide range of needs and applications. Whether you need a steam boiler for industrial use or a hot water boiler for residential use, your local heating contractor can help you find the right model to fit your particular requirements. With proper maintenance and installation, your new boiler should be able to provide reliable service for many years. 

Benefits Of Installing A Boiler

Installing a boiler can be a great way to reduce energy costs, improve interior comfort, and help make the home more sustainable. Boilers are a type of heating system that uses hot water to heat the home, either through radiators or radiant pipes in the floor. For homeowners who are looking for an efficient, cost-effective solution to keep their homes warm during cold winter months, installing a boiler can be an ideal choice. 


One of the primary benefits of installing a boiler is that it offers high efficiency compared to other heating systems. Boilers typically have an AFUE (Annual Fuel Utilization Efficiency) rating above 90%, meaning they utilize nearly all of the fuel used in the system to produce heat for the home. This makes them highly efficient and cost-effective. Another benefit is that boilers can provide consistent heating throughout the home by circulating hot water or steam through radiators or radiant pipes in the floor. This helps ensure rooms stay warm and comfortable even during periods when temperatures outside drop significantly. 

Energy Saving and Cost Effective

In addition to providing efficient heating, installing a boiler also helps homeowners save money on their energy bills over time. Since boilers are more efficient than other systems such as furnaces, they don’t require as much fuel to operate which translates into lower monthly bills for customers. Additionally, since boilers generate heat without producing emissions like some other heating systems do, they don’t require costly repair parts or complex maintenance schedules which helps keep energy costs down even further. 

Environment Friendly

Installing a boiler also helps make homes more sustainable and environmentally friendly by reducing carbon emissions associated with traditional heating methods such as burning natural gas or oil. By utilizing renewable resources like solar power or geothermal energy to produce heat instead of relying on fossil fuels, homeowners can reduce their carbon footprint and help contribute to creating a greener future for everyone. Additionally, many modern boilers feature advanced technologies like smart thermostats which allow users to control their home’s temperature from anywhere using their smartphone—a great way to save energy while away from home! 

Overall, there are numerous benefits associated with installing and using a boiler in one’s home ranging from increased efficiency and cost savings to improved sustainability and comfort levels. With so many options available today from basic models to those with advanced features like automated controls and remote access capabilities—it’s easy for anyone looking for an easy-to-install and reliable source of warmth during colder months should consider investing in a new boiler system!

Boiler Replacement Warning Signs

Boiler replacement is a job that should not be taken lightly, as an improperly functioning boiler can present serious safety hazards. It is important to know the warning signs of a boiler that needs replacing in order to protect oneself and one’s family from potential danger. There are several telltale signs that will indicate when it may be time for replacing a boiler, including loud noises coming from the unit, higher-than-normal energy bills, pilot light going out frequently, and visible rust or corrosion on the boiler. 

If you see any of the warning signs listed below, you might need a new boiler:

The age of your boiler exceeds ten years.

Boilers have limited life spans, so if yours has been running for over 10 years you should look into replacing it. 

The blue flame in your boiler has disappeared.

If you notice that your pilot light keeps going out repeatedly then this could also signal a problem with your existing boiler as older boilers are more susceptible to these types of issues than newer models are. It also means there could be some kind of blockage somewhere in the system which needs to be addressed by a professional before any further damage occurs. 

You notice that your boiler is emitting strange odors.

You notice a strange odor coming from your boiler and it’s not the usual smell you’re used to. It smells like something burning, but there is no smoke or residue in the air around it. You immediately become worried as you know that these kinds of odors can indicate a malfunctioning boiler or HVAC system.  The first thing you should do is to turn off the power source to your boiler, if possible. Once the power has been shut off, call a professional technician right away in order to diagnose and repair the problem. A qualified HVAC technician will be able to pinpoint what is causing the strange odor and provide the necessary repairs.

Your boiler is making noise.

The most common sign of a boiler in need of replacement is an increase in noise levels, including loud banging and rumbling coming from the unit. This could be caused by low water levels or other issues with the internal components like leaking pipes or malfunctioning pumps.

Repairs to your boiler are frequently required.

Boilers are complex machines that use fuel or electricity to generate heat for the home or business. Over time, regular use can cause parts to wear down and require replacement, as well as create mineral deposits on sensitive internal components.

It takes a while for your boiler to warm up.

This could be indicative of an underlying problem with the boiler that needs to be addressed in order to ensure the safety and efficiency of your heating system. There are several things that could cause this issue. It could be due to low water pressure, clogged filters, a blockage in the pipes or an issue with the ignition. If these issues are not addressed, it can lead to more serious problems, such as carbon monoxide poisoning or other safety hazards. A professional boiler technician should be brought in to troubleshoot and resolve any underlying issues with your boiler system. 

The cost of bill  is rising.

Another red flag is your energy bill suddenly shooting up for no apparent reason. If this starts to happen and you don’t think it’s due to something else like increased use of household appliances, then it could be because your boiler’s efficiency has decreased significantly over time due to wear and tear. A newer model would help bring costs back down again by running more efficiently than your old one. 

How Often Should Your Boiler Be Replaced?

The fact that our home appliances don’t last forever, despite the fact that we want them could, invariably causes us inconvenience and disrupts our normal routines. If problems are not addressed, they also have the potential to become a hazard. Regular maintenance on your boiler is essential if you want to keep it in good working order and avoid costly breakdowns in the future. It is recommended that boilers and other hot water heating systems have annual maintenance performed on them to ensure that the system is operating safely and effectively.

A qualified journeyman will carry out a comprehensive inspection of your system’s components and controls in the course of a normal boiler service in order to validate that everything is operating as it should. On the other hand, between our regularly scheduled maintenance visits, there may be instances when you find yourself in situations that are beyond your control. The question now is: how can you tell whether there is something wrong with your boiler? Understanding the indicators can help you determine if and when you need to repair or replace your boiler.

Reasons for Boiler Replacement

There can be several reasons for a boiler replacement. The most common reasons are when the boiler is old and needs to be replaced, when the boiler is not working properly and needs to be fixed or when the homeowner wants to upgrade their home with a new boiler.

No matter what the reason might be, it’s important to have a qualified technician assess the situation and provide an estimate for the cost of replacement. Replacing a boiler can be expensive, but it’s often a necessary expense in order to keep your home running efficiently and safely.


The fact that extremely ancient boilers have so few moving parts means that they are, on the whole, reliable and usually not too difficult to fix when something does go wrong. However, they are likely to have an efficiency of roughly sixty percent, which indicates that forty percent of the heat that is generated is lost through the flue. It’s possible that reliability wasn’t the driving factor behind the choice to replace anything, and that efficiency was.

Because of their fundamentally flawed construction, many boilers, even some that have only been produced within the past ten years, have proven to be extremely unreliable. In point of fact, the majority of boiler cover policies expressly prohibit them. Instead of continuing to spend money on expensive and unreliable repairs, the majority of people choose to accept their losses and purchase new products.

Even while the majority of boilers may require some replacement parts after 10–15 years of service, this is not a sufficient cause to replace the boiler. It is normal to make an investment in the boiler in later years, just like it is normal to do so with a car.

Parts availability

Numerous of us have, at some point in our lives, been given the recommendation to replace anything, most of the time coming from the companies that provide boiler cover for us, on the grounds that many parts are “unavailable” or “obsolete.” This recommendation could be communicated to you either verbally by an engineer who inspects your boiler or in writing by the company that provides your boiler cover.

Be forewarned, the receipt of a letter stating that “certain parts are no longer accessible” does not necessarily mean that your boiler has reached the end of its useful life. Quite early on, manufacturers stop producing non-essential parts like body casing, but they keep producing replacement mechanical and electrical components like gas valves, fans, printed circuit boards (PCBs), diverter valves, and heat exchangers for quite some time. Get in touch with the technical support line of the boiler manufacturer to find out which parts are being phased out.

Home improvements

When you need to modify the location of the boiler or the type of boiler because you are adding bathrooms or a new kitchen, it is a natural time to upgrade the older boiler that you now have. You might find it easier to make do with your aging heater till then!

It’s possible that a boiler protection provider won’t respond to your need for help if the faulty appliance uses parts that have become truly obsolete. However, a good number of them are adaptable to customer-sourced parts, which are searchable on eBay and other online second-hand stores. Whether you should repair or replace your aging boiler is ultimately determined by how long you plan to keep using it despite the increasing likelihood that it may break down.

According to a common line of thinking, if you add more floor space or bathrooms, you will require a larger boiler. This is quite unlikely due to the fact that boilers are enormously huge. It would be more cost effective to evaluate the existing boiler’s capabilities and make investments to improve its efficiency.


Efficiency alone is not always a sufficient justification for replacing an aging boiler, but in some instances, such as when the boiler only operates at 60–70% capacity, it is a very excellent justification.

New Boiler Vs Boiler Repair

The major question here is whether you should continue making repairs to your boiler or whether you should get an entirely new boiler because it will be less difficult for you in the long term. How does the price of a brand-new boiler stack up against the price of repairing or replacing individual parts? How does one go about installing a boiler or getting it repaired? 

Is it truly necessary to make a repair?

A speedy repair can very well be worth the investment. Even though your boiler isn’t operating as efficiently as it should, this does not mean that the end of the world has arrived. It doesn’t matter if your boiler requires a brand-new component or if it simply needs some TLC; following a repair, its lifespan could be extended by years.

When the cold weather approaches, all homeowners require the peace of mind that can be provided by our home heaters on a constant basis. A boiler that is trustworthy is a good boiler since we need them when we need them the most.

Is it wise to invest in a brand-new boiler?

It is totally up to you to decide, as the circumstances surrounding each boiler are unique. It is often easier to obtain a rapid repair and wait until you are in a better financial situation when purchasing a new boiler. This is because a new boiler can be an expensive buy. On the other hand, if you are having a lot of trouble with your existing boiler, it seems like you could be ready for an update. You will be able to take use of technology that is more recent and advanced once you get a new boiler installed. You will be able to reduce the amount of money spent on those monthly expenses by increasing the system’s efficiency and bringing it up to date.

Is the energy efficiency of your current boiler comparable to that of a new boiler?

In a nutshell, the answer is yes. In 2005, new laws were implemented to ensure that all condensing boilers were used when installing new boilers in residential and commercial properties. If the installation of your boiler occurred before this point in time, then the efficiency of your boiler may be subpar.

The efficiency of your boiler is measured in percentages, and those results are then translated into a rating on a scale from A+++ to G. In order for the boiler to receive the highest possible efficiency grade of A+++, it will need to have an efficiency of greater than 90%. A boiler receives a G rating if its efficiency is less than 65%, which is the minimum required.

What is the cost of a new boiler?

The cost of a new boiler will depend on a variety of factors, including the type and size of the boiler, the fuel source, and any additional features you want. Generally speaking, an average gas boiler costs between $2,500 and $7,500. This price range varies depending on the complexity of installation; basic installations can start at around $2,000 while more complex ones may cost up to $10,000 or more. You should also factor in the cost of regular maintenance, which can range from a few hundred dollars per year to several thousand. Additionally, if you’re replacing an old boiler with a new model, you may need to pay for upgrades such as new piping, insulation, and other components.

Is it more cost-effective to purchase a new boiler than to repair the existing one?

The cost of repairing your current boiler or purchasing a number of replacement parts might easily amount to several hundred dollars each time. When the cost of repairs is weighed against the cost of purchasing a new boiler, it is easy to see why so many people choose the latter option.

Many clients like the sense of security that comes with purchasing a new boiler because this eliminates the risk of a failure in the near future and improves the boiler’s overall performance.

New boiler installation – what’s the process?

Installing a new boiler is an important decision for any home or business. It can be a complex process that requires the right knowledge and expertise. The first step is to determine the size and type of boiler that will best fit your needs. A qualified heating contractor can help you make this selection, as well as provide an estimate for the cost of installation. Once the boiler has been chosen, it must be connected to your existing plumbing and heating system. This connection can involve complex wiring and pipes that need to be carefully installed. The contractor can provide a detailed explanation of how this will all be done. 

After the installation is completed, you should receive a certificate of inspection from your local authorities. This document will ensure that the boiler has been properly installed and is working according to safety standards. You should also receive a warranty from the manufacturer, which will provide you with coverage in case something goes wrong with your new boiler. Finally, it is important to have regular maintenance performed on the boiler to keep it running properly and efficiently. A qualified contractor can take care of these tasks for you. By following the steps above, you can rest assured that your new boiler will provide reliable and efficient heating for years to come. 

Importance of Professional Contractor in Boiler Repair & Replacement

When it comes to boiler repair and replacement, the importance of hiring a professional contractor cannot be understated. Boilers are complex systems that require precision and attention to detail when being repaired or replaced. By enlisting the services of a professional contractor, you can rest assured that your boiler’s repair or replacement job is completed with the highest level of quality. 

Furthermore, professional contractors can provide you with invaluable advice and expertise on the best course of action for your boiler’s repair or replacement. By having an experienced contractor on-site to complete the job, you can have peace of mind knowing that the work is being completed correctly. Additionally, professional contractors are equipped with the right tools and materials to ensure that the job is done efficiently and properly. 

Professional contractors can help you save money on the cost of the repair or replacement of your boiler. Professional contractors have access to specialized parts and materials that may not be available through other sources. As a result, they will usually be able to complete repairs or replacements at a lower cost than what would be available if you tried to do the job yourself. 

Finally, professional contractors can provide you with peace of mind by offering warranties on their work. A warranty guarantees that your boiler is repaired or replaced properly and that it will continue to function as expected for a certain period of time. This guarantee can give you the confidence that your boiler is in good hands, and any issues you may have will be addressed in a timely manner. 

When it comes to boiler repair and replacement, hiring a professional contractor is always the best choice. Professional contractors are knowledgeable, experienced, and equipped with the right tools and materials to ensure that your repair or replacement job is completed correctly. Additionally, they can help you save money on the cost of repairs or replacements and provide you with peace of mind by offering warranties on their work.  Hiring a professional contractor is always the wisest decision when it comes to boiler repair and replacement. 

Sink and Faucet Repair Service

Sink and faucet repair services are an essential part of home maintenance. From minor clogs to major plumbing malfunctions, getting your sinks and faucets serviced regularly can help you save money in the long run. 

When it comes to sink and faucet repair service, the first step is diagnosing any problems you may be having. A qualified plumbing technician can inspect your sink and faucet system to determine the root cause of any issues. Depending on what they find, they can then suggest cost-effective repairs or replacements that will bring your sink and faucet back to working condition.

Along with inspection, plumbing technicians also specialize in a variety of plumbing services. From clearing clogs and repairing leaks to installing new faucets, your technician will have the experience and tools needed to get the job done right. They can also perform a full inspection of your pipes and drains to make sure they are in good condition. This can help prevent costly repairs down the road.

Finally, your plumbing technician can provide tips on how to maintain your sink and faucet system. This includes checking regularly for leaks, keeping the area around drains clear of debris, and using the right products to prevent clogs. With regular maintenance, you can ensure that your sink and faucet system will work smoothly for years to come. 

Sink Maintenance

We just don’t give things like maintaining our homes enough thought, and as a result, we allow things like them slip through the cracks. We let our cars travel 6,000 miles before taking them in for an oil change, the list of things that need to be done around the house gets longer and longer, and the less important tasks get lost in the shuffle of everything else that has to be done. It is easy to miss anything like this, but doing so is not a good idea. When it comes to your drains, it is imperative that you are aware of the potential consequences of failing to do routine maintenance on them.

Maintaining your sink on a regular basis can reduce the chance of blockages, save you money on repairs, protect your health, and lengthen the useful life of your pipes and plumbing system. The following are some of the reasons why you should maintain your sinks:

Clogs Can Be Prevented With Routine Maintenance.

Things like food, garbage, hair, soap, and other filth clump together over time, piling up inside your drains and pipes until they are totally blocked. This can cause a number of problems, including flooding and sewage backups. This accumulation gets worse when you don’t maintain your sinks, and before you know it, the water in your sink won’t drain or you’ll be standing in water that’s up to your ankles when you’re trying to shower. Clogs are never convenient and are never simple to deal with; as a result, it is always advisable to take whatever precautions are necessary to avoid them.

When you take the stoppers out of your drains and remove any hair and other debris that has built up over time, you will help prevent these objects from going down your drains and being lodged in your pipes. The combination of baking soda and vinegar is an effective approach to clean up your pipes without causing any damage to the pipes themselves.

Maintaining your sinks will save you money on expensive repairs.

The reality of the situation is that repairs to plumbing are not always inexpensive. By doing routine maintenance on your sink, you may reduce the likelihood of unpleasant clogs and other major problems, such as water leaks in your plumbing system, which can lead to expensive repairs. Taking the effort to clean your sinks may seem like an unnecessary burden; nevertheless, investing even a small amount of time once a month can significantly help prevent troubles in the plumbing system of your home and save you money on costly repairs.

Maintaining Your Sink Reduces the Dangers to Your Health

Because of all the bacteria and crud that tends to build up in these areas, sinks can be some of the dirtiest and germiest places in our homes. There is a high prevalence of bacteria in and around sinks, including Salmonella, Campylobacter jejuni, E. coli, and Staphylococcus. These bacteria are well-known to play a role in the development of serious illnesses. Putting off sink cleaning and maintenance raises the likelihood of coming into contact with the bacteria that cause illness and being unwell as a result of that contact. By keeping your sinks clean, you can limit the amount of germs at a manageable level and prevent it from migrating to other parts of your home.

Your pipes and plumbing system will have a longer lifespan as a result.

A significant amount of additional time can be added to the lifespan of your pipes and plumbing system if you do routine maintenance on your sinks. Your pipes are subjected to stress from a variety of sources, including clogs, buildup, grease, and significant amounts of trash, which causes them to gradually deteriorate. A pipe that has been weakened is more likely to break, which will result in a water leak and consequent damage to your home due to the water.

Most of the time, we don’t do anything about it until we notice something is blocked. The next step is to use strong and abrasive drain cleaners that we bought at the supermarket. These cleaners are poured down our sinks. Drain cleaners purchased from stores really chip away at your pipes and cause them to get weaker over time, which can lead to other issues. By performing routine maintenance on the sink, blockages can be avoided, which eliminates the need for the harsh, abrasive chemicals that reduce the lifespan of the pipes.

What You Need to Know About Faucet Repair

When it has been established that there is a problem with your sink’s faucet, there are a few bits of extra information that can help repairs go more smoothly. Keep in mind that if the damage is serious or widespread, installing a new faucet could end up being the more cost-effective option. If you don’t take care of this issue, it won’t be long before you have to deal with another plumbing issue.

Identify the Kind of Faucet You Want to Use

Knowing the kind of faucet you have is the first step in making effective repairs. This does not refer to whether the fixture is for the kitchen or the bathroom; rather, it refers to the internal components that are there in order to provide drinkable water. Because our plumbers have worked with a wide variety of faucets in the past, they are able to detect yours immediately and begin repairs in a more timely manner.

  • The compression faucet is the earliest style of faucet that is still widely used in homes and commercial settings today. The provision of sufficient water at the appropriate temperature is accomplished through the utilization of a rubber washer and two handles.
  • Both one-handle and two-handle configurations are offered for the Cartridge Faucet. The water flow can be adjusted on a design with a single lever by raising and lowering the valve that is located inside the handle.
  • The most popular type of single-lever faucet is known as the ball faucet. When the lever on the faucet is moved, a ball made of plastic or metal travels inside the faucet, which opens the water flow. The desired temperature is achieved by combining hot and cold water in separate chambers located throughout the ball.
  • Another type of single-lever faucet that could be mistaken for a ball faucet is called a ceramic disk faucet. In these types, the water flow is controlled by a valve that operates more like a cartridge faucet and may be raised and lowered. The movement of a ball faucet, on the other hand, is in a spherical direction.

Turn off the water before searching for the malfunctioning component.

The next stage for the plumber, once they have determined what kind of faucet you have, is to figure out where the issue initially arises. The body of the faucet and one or two handles make up the two primary components of the vast majority of designs. Having an understanding of the nature of the challenge they face can make solving it much simpler.

In order to fix the faucet, it is usually necessary to disassemble it first. This is true regardless of the nature of the issue. The internal components can be accessed using equipment such as slip joint pliers or a basin wrench, which should be included in every respectable repair kit.

Determine whether a component requires cleaning or replacement before proceeding.

There are situations in which a problem can be solved by just locating the precise component that is causing the issue and cleaning it thoroughly. However, if the component is damaged in any way, such as being cracked or broken, it is recommended that it be replaced. There is no need to be concerned about the expense of a replacement component for the spout, O-ring, or any washers because these parts are rather inexpensive.

It’s possible that unique faucets, such those for an outdoor garden hose, will make this process more difficult.

Common Faucet Problems

The water supply lines in your home are connected to the faucets in your home. If they become damaged or stop working properly, you risk being unable to obtain the water you require. Or, even worse, using the water is no longer recommended because it is no longer safe or wholesome.

A Faucet That Leaks

One of the most typical issues that might arise with the plumbing in your home is a faucet that leaks. Your regular water bill can go up if you have any leaks in your plumbing, such as a dripping faucet or a stream of water that goes to waste. Depending on the amount of water that is escaping, there may even be harm caused by water!

Repairing a leaking faucet is typically a simple and affordable task. In order to restore the normal flow of water, a skilled plumber will first locate the component that is causing the leak, and then either repair or replace it.

Not Enough Warm or Chilled Water

The water that comes out of your faucets can be either hot or cold. The design of the faucet, which can have either one or two handles, is the primary factor that determines how the temperature is selected and adjusted. In many cases, the problem can be solved simply by repairing the handle.

If, on the other hand, you are experiencing a lack of hot water, there may be a more complicated issue at play. It’s possible that this is an indication that your water heater is broken; in that case, you should get in touch with an experienced plumber.

Lack of Adequate Water Pressure

A damaged faucet, as opposed to a leaking pipe, may result in a reduction in water pressure or may even completely halt the flow of water. Not only is this annoying, but the additional pressure may cause other issues further down in your plumbing system.

Your plumber will need to be aware of the type of faucet you are using in order to effectively repair any issues with water flow. In certain cases, the problem might be remedied by simply cleaning the component that is being affected. There may be more problems that may be traced back to the seal that is responsible for separating your faucet from the water supply.

Keep in mind that something like this doesn’t occur very frequently. When the plumber determines that the problem is not caused by the faucet, he or she will investigate other problems, such as rusted pipes and obstructions (as these also cause the water pressure to fall). The water pressure will decline even with valves that are just partially closed, which will result in a feeble flow.

Faucet Leakage Causes

Internal corrosion, mineral buildups, or broken pieces could be the cause of a leaking faucet, which would necessitate repair work.

Internal Corrosion

Cracks will form as a result of internal corrosion, which will allow water to penetrate the structure. In addition, corrosion will cause the sealants that surround the faucet to deteriorate, which will result in the faucet leaking. Remove corrosion from the faucet using a soft cloth and a mild cleanser to complete the do-it-yourself faucet leak repair. You might need to use a product that was developed specifically for the purpose of removing severe corrosion from metal in order to get rid of corrosion that is resistant to removal. Corrosion has most likely caused the O-ring to become compromised if the base of the faucet is leaking. Leaks in the faucet usually appear around the spout when there is corrosion present in the ball valve. It is important to perform routine checks on your faucets for cracks as soon as possible so that they may be repaired before any additional harm is caused.

The Accumulation of Minerals

If you observe a decrease in the amount of water that comes out of your faucet, you may have a mineral buildup on your hands. In Jackson County, where I live, the water contains a significant amount of lime, which can lead to leaking faucets. The accumulation of lime and other minerals within your faucets will result in a rise in water pressure, which places additional strain on the joints and seals of your faucets. Utilizing a gentle brush and some cleaning solution, carefully remove any mineral deposits. Because mineral cleaning solutions can damage the finish of your faucet, you should make sure to rinse it off as soon as possible after using them.

Faulty Components

As you crank the handles of the faucet, do you find that it is becoming increasingly difficult to entirely stop the flow of water? Failure of cartridge valves can be brought on by everyday wear and strain. In the event that the cartridge valves become defective, you will be required to use an increasingly greater amount of force when turning the handles in order to stop a leak. In order to effectively fix a leaking faucet, the Cartridge valves will need to be replaced over time.

How Much Does Faucet Installation Cost?

Professional faucet installation by an experienced local plumber, such as the helpful staff at American Plumbing Services, does not come cheap. While we’d like to advise you how much you should budget for this service, the cost of replacing a plumbing fixture or faucet varies.

Having said that, we can offer you an indication of how much you might expect to pay. The main thing to remember is that having your faucets and fixtures professionally installed is an excellent investment.

Faucet Installation Costs on Average

The national average cost to replace a faucet is $243, according to, an online home improvement marketplace. The costs vary, but most consumers pay between $154 and $332.

However, the overall cost of expert installation may be higher – or lower – than these numbers. A basic job could cost as little as $90 at the low end of the spectrum. A more sophisticated plumbing fixture replacement might cost as much as $550.

Factors Influencing Faucet Installation Costs

The cost of expert faucet replacement is determined on your specific plumbing scenario. The following factors will be considered by your plumber when calculating the overall price:

The state of your current faucet

The condition of the linked pipes, valves, and plumbing fixtures

The replacement project’s location

The fixture’s water control configuration

Most of the time, you may expect to pay more if your existing faucet is rusty or broken, or if any plumbing repairs are required to complete the installation. A plumbing fixture repair in a difficult-to-reach location, or one that requires additional effort to modify the water control or access the plumbing lines and fittings, will also be more expensive.

Why Should You Hire a Licensed Plumber for your Sink and Faucet Repair

One of those home repair chores that appears simple enough to tackle on your own is faucet replacement. However, installing a kitchen or bathroom plumbing fixture can be a difficult task.

Because the old faucet may be difficult to remove, specialized tools are frequently required. In addition, for a proper installation, the associated pipes, valve connections, and fasteners may need to be fixed or replaced. Other plumbing fixtures, such as the garbage disposal or sink trap, may need to be temporarily removed in order to gain access to the drain lines and faucet fittings.

More importantly, a qualified plumber knows how to avoid a broken pipe or possibly devastating leak. Many homeowners have encountered pricey water damage repair – and had to contact a plumber anyhow – as a result of a botched DIY faucet replacement job.

Hire an expert local plumber if you’re upgrading a kitchen or bathroom plumbing fixture. A professional can install the new faucet properly, ensuring that your plumbing is in good working order and that your home is leak-free.

Toilet Repair and Installation Service

When it comes to toilet repair and installation services, homeowners can trust their local plumbing professionals for reliable, high-quality results. Toilets are an essential part of the home – whether you need a minor repair or a full installation, you can depend on experienced plumbers to get the job done right. With decades of experience in the business, local plumbers are well-versed in how to diagnose and repair all types of toilets, from basic homeowners models to the highest-end units. They can even help with installation – whether you’re replacing an old toilet or upgrading your existing one, they’ll make sure it’s done quickly and correctly. 

And because they use the latest tools and techniques, the job will be done right the first time. From leaks to clogs, toilet repair and installation services from local plumbers can ensure that your plumbing is in good working order for years to come. So if you’re having trouble with your toilet or need a new one installed, call on experienced local plumbing professionals for expert results. They’ll go above and beyond to make sure your bathroom is functioning properly!

Toilet Repair

Toilet repair is an essential home improvement task that can often be a challenge for homeowners. Toilets are made up of many different parts and components, so it’s important to have a basic understanding of how toilets work in order to fix common problems. In some cases, simple repairs can be done without any specialized tools or knowledge, but more complex issues may require a professional plumber. 

The first step in toilet repair is to identify the issue. Many common problems are related to clogs and blockage, which is often caused by excessive paper or other materials being flushed down the toilet. Other potential causes include broken components like gaskets or flapper valves, corroded pipes or seals, low-pressure water supply lines, and potentially even tree roots invading the sewage lines. Once you’ve identified the problem, it’s time to either get to work on fixing it yourself or call in a professional plumber if needed. 

If you decide to make the repairs yourself, make sure that you first turn off the water supply valve located behind your toilet before getting started. This will prevent any further damage from occurring while you’re working on the project. Once this is done, you can start disassembling your toilet and taking a look at what’s going on underneath the lid and tank. Depending on what type of problem you’re dealing with, there are various solutions available – such as snaking out clogged pipes with an auger tool or replacing worn out parts like gaskets and flappers with new ones from your local hardware store. 

When repairing plumbing fixtures like toilets, it’s also important to remember basic safety precautions like wearing gloves and eye protection when working around water due to possible contamination issues. Additionally, take advantage of appropriate resources such as online tutorials or guides from trusted sources in order to confidently complete your project without creating any additional problems for yourself down the line. Lastly, if all else fails or you’re unsure about whether you can handle the job yourself – call in a professional plumber who will be able to quickly diagnose and solve any issue with your toilet system!

Common Toilet Issues

Clogged Drain Pipes

One of the most common toilet problems experienced by homeowners is clogging. This can be caused by a variety of things, such as excess waste, foreign objects being flushed down the toilet, or too much toilet paper being used. Clogs can be difficult to remove and may require calling a plumber if they cannot be cleared using a plunger. Alternatively, using a drain snake can sometimes clear out clogs without having to call in professional help. 

Leaking Toilet

Another common problem is leaking toilets. This is usually due to worn out parts within the tank or bowl that are no longer sealing properly. In this case, it’s important to replace these parts as soon as possible in order to prevent further water damage inside your home. In some cases, you may also need to repair or replace the toilet flange, which serves as an anchor between the toilet and the flooring. 

Broken Toilet Flush Flapper Valve

Toilets that continually run are another very common issue for homeowners. This is usually due to either an issue with the fill valve or flush valve not working properly or possibly something blocking the flow of water into the tank itself. For this particular issue, it’s best to have a professional check out your toilet in order to determine what exactly is causing it before taking any kind of action yourself. 

Discolored Water

Discolored water coming from your toilet could indicate other serious issues with your plumbing system such as high levels of iron in your water supply or sediment buildup within your pipes. It’s important to get this checked out right away so you don’t end up dealing with bigger problems down the road. A qualified plumber will be able to diagnose and repair any type of plumbing issue you might be having in order for you and your family to enjoy clean and safe running water throughout your home for many years to come!

Toilet Installation

Installing a toilet is not a complicated job, but it does take some time and effort. Toilet installation involves positioning the toilet bowl and tank correctly, connecting the plumbing and water supply, and securing the toilet to the floor. It is important to always follow safety precautions when installing any type of plumbing appliance in your home. 

Before beginning any work on a new toilet installation, you need to make sure that the area around the toilet is clear of debris, dust or any other obstructions that could interfere with a successful installation. You should also ensure that you have all of the necessary tools and materials needed for the job. This could include a wrench set, plumbers tape, caulking gun and sealant, toilet mounting bolts, adjustable wrench or basin wrench, wax ring, closet flange bolts or screws and plumbing supplies such as PVC pipes or fittings. 

Once all of your materials are ready to go you can begin working on your installation project. Start by disconnecting the old toilet from its water supply line at both ends – one at the shut off valve under the tank and one at the backside of the bowl where it connects to the wall water line – using an adjustable wrench or basin wrench. Then remove any mounting hardware from underneath the tank including toilet tank bolts before lifting it up off the bowl for removal. 

Next secure the mounting bolts into threaded holes located at the bottom side of the bowl base then place wax rings between bowl base and closet flange (the pipe fitting in floor). Lastly set a complete assembled unit over flange aligning bolt holes with slots in closet flange then press firmly down for proper sealing so there are no gaps around edges. Make sure that everything is aligned properly so nothing will leak later on during usage. 

The remaining tasks involve attaching new water supply line to bottom side valve found inside back end of tank; connect them with hand-tightened nut securely after making sure they fit snugly together without causing any leaks or drips; attach flush handle onto outside front end of tank; turn off main water supply valve; fill tank with cold water until reaching maximum level as indicated on inside surface; turn on main water supply valve & leave running for few minutes to within reach maximum pressure indicated by manufacturer’s instructions; check for any leaks or dripping around connections before finalizing installation process. 

Once these steps are completed you should be able to enjoy many years worth of reliable use from your newly installed toilet! Make sure to always follow safety precautions when installing any type of plumbing appliance in your home as it can potentially lead to serious injury otherwise if done incorrectly. 

Additionally keep in mind that although most professional plumbers can complete this task efficiently there may be times where you might need assistance from an expert due to certain circumstances pertaining specific models & brands which only knowledgeable professionals understand how best tackle such issues efficiently without damage occurring elsewhere throughout entire system network setup used across residence/building facility!

Water Heater Repair & Replacement Service

Water heaters are essential for modern living, providing hot water for showers, dishes, clothes, and other necessary tasks. However, when a water heater malfunctions or breaks down it can cause disruption to everyday life and be a major inconvenience. In these cases, it is important to take the appropriate steps to repair or replace the water heater. 

What is a Water Heater?

A water heater is an essential appliance in many households and businesses, providing hot water for showers, dishes, laundry, and other purposes. It is a large metal cylinder containing several heated coils of copper or steel tubing. These coils are connected to a supply of cold water, which then heats up as it passes through the coil and into the tank. Water heaters typically come in various sizes and capacities, depending on the desired hot water needs.

Water heaters work by using electricity to heat up the coils to generate steam, which then rises into the tank where it condenses back into hot liquid form. This heated liquid is then distributed throughout the home or business when hot water is needed. Electric water heaters usually have two heating elements that work together to provide consistent hot water temperatures. Gas-fired models use natural gas or propane to heat the heating element and create steam within the tank while some models are powered entirely by solar energy. 

Water tanks can last anywhere from 5-15 years depending on usage and regular maintenance such as flushing sediment buildup from around its heating elements. Regular flushing will help ensure that your system runs more efficiently for longer periods of time, saving you money in both energy costs and replacement fees over time. There are also now more energy efficient models available on the market that work by using a combination of advanced insulation materials and high-efficiency components such as motors, pumps and valves to reduce energy consumption even further. 

For those looking for increased convenience, there are now “tankless” units available on the market that do not require a storage tank at all but instead quickly heat up incoming cold water with either gas or electric power sources before routing it out through a faucet or showerhead with no interruption in service or temperature fluctuations occurring during its operation. In addition to this added convenience, these newer models also typically offer substantial savings in terms of their operating costs due to their shorter preheat times and lower operational temperatures required compared to traditional storage tank systems.

Water Heater Types

There are several different types of water heaters used to provide hot water for homes and businesses. The most common type is the tank-style water heater, which uses an insulated storage tank to hold a supply of heated water that is ready for use when it’s needed. Tankless, or on-demand, water heaters can also be used to provide hot water, but they are a more efficient option that heats the water only as it is being used. Solar powered water heaters are another popular option that utilizes renewable energy from the sun to help reduce energy costs associated with heating water. 

Tank-Style Water Heater

The traditional tank-style water heater is the most commonly used type of residential and commercial hot water heater. This type of unit consists of an insulated storage tank that holds between 20 to 80 gallons of heated water at any given time. The internal temperature of this device is typically set between 120°F and 140°F by a dedicated thermostat on the unit. As new cold water enters through a supply line connected to the tank, it is heated by either natural gas or electricity until it reaches the desired temperature before being delivered through pipes leading from the tank itself. Once all of the stored hot water has been depleted from the unit, fresh cold-water enters in order to start up another heating cycle in order for hot water to be readily available when needed. 


Another type of hot-water system available today is called a tankless or on-demand system. This system does not store any preheated hot water like its traditional counterpart, but instead heats up cold-water as it passes through copper coils inside from its source such as a city main or well pump at rates up to five gallons per minute while allowing users to set exact temperatures according to their needs and preferences. These units have become increasingly popular over recent years due its ability to provide instant hot-water while also saving homeowners money on their utility bills compared with operating traditional tanks systems due its higher overall efficiency ratings when operated properly. 

Solar Powered

Solar powered systems are becoming increasingly popular due their ability to utilize renewable energy sources such as sunlight in order generate thermal energy by capturing solar radiation using collectors and then transferring that thermal energy into stored potable hot-water in special tanks designed specifically for this purpose making them great options for warmer climates where plenty of sunshine can be found throughout most days during the year. In addition, other benefits associated with using solar powered systems includes their ability reduce greenhouse gas emissions caused by burning fossil fuels, help improve air quality, and even add value to your home if you ever decide sell it down road in future.

Water Heater Replacement Warning Signs

It’s not enjoyable to run out of hot water when you need to replace your hot water heater. Your water heater, like most of your appliances, is utilized every day, which means you’ll ultimately need to replace it. A hot water heater has an average lifespan of 8-12 years, so you should anticipate replacing it once every decade or so. Remember that regular maintenance can help you protect your investment. Professional maintenance and upkeep can extend the life of your water heater.

Nobody likes a cold shower or dirty dishes, so you should replace your water heater before it fully fails. Waiting too long can lead to far worse problems, such as a leak, which can lead to costly water damage.

There are a few things you can look out for in between expert maintenance sessions to ensure there are no issues. Here are several indicators that it is time to install a water heater:

Rust and Corrosion Around the Water Heater

Be sure to keep a close eye on the tank of your water heater and inspect it on a regular basis to look for any rust or corrosion that may have built up over the years. There are two locations that require thorough examination on your part: the area around the temperature and pressure relief valves, as well as the connections for the intake and outflow. The accumulation of rust and corrosion is especially likely to occur in these regions. Ask your technician at your next appointment for routine maintenance if you don’t know how to find these locations; they should be able to show you where to look and send you in the right direction. If you keep these places clean and maintained, your unit will be able to last longer, which will allow you to put off replacing the hot water heater for longer.

Another thing that you should keep an eye out for is water that is rust-colored coming from your hot water heater. In most cases, this indicates that the inside of your tank has begun to corrode. Because damage of this nature will inevitably result in the formation of a water leak, you should give serious consideration to replacing your water heater as soon as is practically practicable.

Cold or Lukewarm Water

When you turn on the hot water faucets in your shower and the water that comes out is lukewarm or cold, this is a clear indication that you need to replace your water heater. When your water never actually gets warm or hot at all, this is typically an indication that there is a problem and not simply a delay in the sensation of warm water starting to come out of the faucet. In the vast majority of circumstances, this is a clear indication that you have to give some thought to the possibility of putting in a water heater.

The Water Is Beginning to Collect Around the Heater

You should also go around the unit and search for any pooling water while you are inspecting it for rust and corrosion. This should be done at the same time. If you find even a trace of moisture inside your hot water tank, there is probably a leak or a crack somewhere inside the container. Your tank’s metal will expand and crack as it heats up, allowing water to escape through the lesions in the metal as it does so. This could be the reason why the tank is leaking, and it could also indicate that it’s time to replace the water heater.

How Much Does a New Water Heater Cost?

If you’ve noticed symptoms that it’s time to replace your water heater, you’re probably wondering how much a new water heater would cost. Angie’s List reports that “a 50-gallon tank averages between $795 and $2,800 for the device and installation, depending on many variables.” Several factors might influence the cost of replacing a water heater. It is dependent on the type of unit you have and the one you are replacing. Additional fees may apply if building codes have changed since your last unit was installed. Your water heater replacement cost is also affected by labor expenses in your area.

When Should You Change Your Water Heater?

You can significantly reduce the cost of water heater repairs with maintenance programs. However, if your water heater is older than ten years, it probably needs to be replaced soon. The average lifespan of a conventional water heater is 8 to 12 years.

If your water heater is older than 10 years when we come to your home for repairs, we will undoubtedly give you options for the best, most affordable water heater replacement. We at Atlas Plumbing & Heating are concerned about your investments and will work with you to get the best return possible.

Water Heater Maintenance

It’s possible that scheduling maintenance for your system’s water heater isn’t at the top of your to-do list, but there are many compelling arguments to suggest that it should be. Homeowners who get their water heaters serviced by a professional will enjoy a variety of additional system benefits that they would not have access to otherwise.


Did you know that in order to keep your manufacturer warranty valid, your system needs to be maintained on a yearly basis? It is a fact that you run the risk of nullifying the warranty on your vehicle if you do not perform expert maintenance in accordance with the plan that is indicated in the owner’s manual. This means that if your system ever malfunctions while the warranty is still active, you won’t be able to take advantage of any repair services that might be covered unless you can prove that your unit was maintained on an annual basis. If you can’t prove that your unit was maintained annually, you won’t be able to take advantage of any repair services that


Minerals will eventually collect at the bottom of your water heater, making it more difficult for the appliance to produce hot water as time passes. Because of this, the amount of water that can be heated will inevitably decrease, which will result in a decreased supply of hot water. This will be especially true if you use a conventional water storage tank system rather than a tankless water heater. During the maintenance procedure for your water heater, the plumbing professional will clear up any mineral buildup that has occurred within the system. When sediment is removed from your water heater, the system will be able to function in a way that is far more efficient.


The plumbing maintenance professional you choose will, in addition to eliminating excess silt from your system, assist you in identifying the need for repairs as soon as possible. This can help you better anticipate what maintenance requests for your water heater you may need in the near future, and it may also help you prevent a complete collapse of the system. You will be able to better prepare financially for the needs of your system if you have a better grasp of the current health of your water heater. This will prevent you from having to deal with an unexpected expense in the future.


One of the most significant advantages of having a professional maintain your water heater is the decreased costs associated with your water supply as a direct result of the maintenance. The removal of excess buildup inside your system by a plumber to improve efficiency will result in lower operational costs throughout the year. This is because your unit will not have to work as hard to produce hot water as a result of the removal of the excess buildup. Your plumber will be able to discover and solve minor issues with your water heater before they become serious enough to require the assistance of a professional technician, which will result in lower water heater ownership costs for you.


Depending on the type of system that you have in place, your water heater unit may have a lifespan of up to 20 years or even longer if you take the time to properly maintain the system. However, the only way to reach this level of durability is by adhering to a maintenance program on an annual basis. Systems that do not receive regular maintenance have a much increased risk of malfunctioning, which will result in an earlier need for replacement.

Emergency Plumbing Repair

Emergency plumbing repair is a service that is vital for addressing any unforeseen plumbing issues in an efficient and timely manner. There are various kinds of plumbing issues that may arise, ranging from clogs or blockages to broken pipes, leaks, and more. These types of problems should all be addressed immediately to avoid further damage and costlier repairs. 

In the event of a plumbing emergency, it’s important to contact a professional plumber right away who can arrive quickly and assess the situation. They will have the necessary tools and experience to quickly determine the problem then come up with an effective solution. The benefit of using an experienced plumber is that they can often fix complex problems efficiently, saving valuable time and money in the process. 

When encountering a plumbing emergency, it’s important to act fast in order to prevent further issues from arising. Preparation can go a long way in avoiding these kinds of emergencies altogether; for example, routinely examining your pipes for signs of wear or blockages in order to head off major disasters before they occur. However, if an emergency does arise it’s important to contact professional services as soon as possible so they can begin working on addressing the issue before it worsens any further. 

Common Emergency Plumbing Repair Services

Common emergency plumbing repair services include leak repairs, pipe repairs and blockage removals. Leak repairs involve identifying the source of the leak and repairing it so that no further water damage occurs. Pipe repairs may be necessary when existing pipes are broken, cracked or corroded. Blockage removal is a necessary service when drains become clogged with debris or organic matter such as tree roots or grease. 

Other common emergency plumbing repair services are water heater repairs, hot water tank replacements and sump pump installations. Water heater repairs include checking for gas leaks, testing the pilot light and inspecting the heating element to ensure proper operation. Hot water tanks can fail due to age-related wear and tear or sediment buildup. Replacing a hot water tank involves removing the old one, purchasing a new one and installing it correctly to avoid any future problems. Sump pumps are used to prevent flooding by pumping out excess rainwater away from a home’s foundation. Installing a sump pump requires careful planning and installation, in order to ensure all components work together correctly to minimize any potential risk of flooding. 

Any home plumbing system contains multiple components that require regular maintenance in order to work properly. Emergency plumbing repair services can help ensure that these components function smoothly and efficiently, helping keep costs down in the long run by preventing more serious damage from occurring in the future. When faced with an emergency situation, it is important to contact a qualified plumber who can provide sound advice on how best to proceed with your particular issue. An experienced plumber will be able to assess the problem quickly and accurately identify any potential risks associated with attempting a DIY fix that could potentially lead to further problems down the line if not addressed properly by a professional plumber who understands all aspects of plumbing systems inside and out.

Benefit of using Professional Emergency Plumbing Services

The key benefit of using professional emergency plumbing services is their ability to swiftly diagnose what’s wrong and then rapidly rectify the issue without creating any additional mess or damage around the property. Furthermore, since most plumbers offer 24/7 services you don’t need to wait before having your problem fixed – which saves both time and money when compared with DIY solutions (not recommended since this could cause more harm than good). 

At times when you least expect it, you may find yourself faced with a plumbing emergency requiring immediate assistance from experienced professionals who know exactly how best to address the situation at hand – no matter how small or large the problem might be! By entrusting your repairs into expert hands you can also rest assured knowing that your property will be restored back into its optimal condition as quickly as possible – so make sure you enlist help from local professional services whenever needed!

Residential & Commercial Plumbing Emergencies

Though the two have many practical similarities, commercial plumbing has some intricacies that residential plumbing systems do not. Our plumbers have the skills and experience to handle residential and commercial plumbing systems.


Atlas Plumbing & Heating specializes in single-family homes. Our crew is well-versed in all home plumbing systems and can quickly detect issues and provide the most cost-effective solutions. Whether you reside in a house or an apartment complex, you may depend on our plumbers.


We have the resources to tackle any home plumbing problem, from your sink to your sewer.


Commercial plumbing crises may be more complicated than residential ones since they often impact many customers or inhabitants. A clogged toilet or a lack of hot water may be detrimental to a company, so we always advise hiring a plumber as soon as possible to keep things going smoothly.

Restaurants, Bars, and Other Food Establishments

Because these are high-traffic locations, resolving issues as soon as possible is vital. Avoid negative feedback and health risks by contacting emergency services as soon as possible.


Plumbing setbacks may reduce sales, force staff to take additional sick days, and jeopardize a company’s image. To prevent these issues, business owners should respond swiftly to plumbing situations.


Plumbing and Heating Services are vital components of any home – they not only keep our properties safe but also make them more comfortable year round by ensuring proper functioning of our electricity, water supply systems & heat sources. Additionally they offer us peace of mind knowing our homes have been properly inspected & serviced by certified professionals who understand all aspects of the job & are able to handle any problem quickly & effectively so we can rest easy knowing our homes are well taken care of!

In Need Of Emergency Plumbing Services On Long Island? We Are Here For You!

With over 30 years of plumbing experience, we have solved every kind of problem imaginable. From water heater replacements to water main breaks, there is nothing that our team can’t handle! We offer high quality service at affordable prices, with friendly customer care throughout all interactions.

We have a team of experienced and certified plumbers who are available 24 hours a day, 7 days a week.  We also offer a 100% satisfaction guarantee on all of our work. So if you’re ever in need of a plumbing company, be sure to call Atlas Plumbing & Heating!

Have a plumbing or heating problem?